• Stocked in Matte Black in 50, 75 and 100 mm profiles
• Creates clean straight lines and smooth curves
• Corrosion-resistant aluminium will not rust, crack or rot
• Powder coated finish complements contemporary landscapes
• Lightweight and suitable for DIY or professional installation
• Lengths connect for a smooth, continuous finish

50 mm: Recommended as a versatile general-purpose edge for lawns, garden beds, paths and paving.

75 mm: Recommended where a deeper border or greater separation is useful.

100 mm: Recommended for taller borders and applications requiring greater separation or support between adjoining surfaces.

1. Clear the area, then compact and level the base.
2. Position the edging and form the required line or curve.
3. Partially hammer spikes through the pre-punched base holes. Link Edge recommends approximately four spikes per 3 m length.
4. Place additional spikes at pivotal points, especially around bends and curves.
5. Join further lengths using the matching fishplate connectors.
6. Check and adjust the alignment before firmly hammering the spikes into place.
7. Fill both sides with the chosen landscape surfaces.

Use spike guides with 75 and 100 mm profiles where extra upright rigidity is required.

• The 50 mm profile uses 40–50 mm fishplate and corner connectors.
• The 75 and 100 mm profiles use 75–100 mm fishplate and corner connectors.
• Spike guides are suitable for the 75 and 100 mm profiles.
• Allow approximately four edge spikes per 3 m length, subject to layout and site conditions.

Accessories are sold separately.

Matte Black is held in stock in 50, 75 and 100 mm sizes. Other finishes shown by Link Edge, including Sable Bass, Sable Asteroid, Weathered Steel and Elements Black, may be available by special order with an approximate 3–4 week lead time. Availability should be confirmed before ordering.

Which powder coated sizes are held in stock?

Matte Black is held in stock in 50, 75 and 100 mm profiles. Each option is 3 m long.

Can I order another colour?

Other powder coated colours may be available by special order. Allow approximately 3–4 weeks and confirm colour availability before ordering.

Can the powder coated edging be curved?

Yes. It can be installed in straight lines or shaped into smooth curves. Work carefully when forming curves to protect the finished surface.

How many spikes should I use?

Link Edge recommends approximately four spikes per 3 m length, with extra attention at bends, pivotal points and demanding sites.

Which connector size do I need?

Use a 40–50 mm connector for the 50 mm profile. Use a 75–100 mm connector for the 75 and 100 mm profiles.