Mortar Mix is a carefully selected and proportioned blend of graded sand, cement and hydrated lime. Mortar Mix is suitable for the laying of bricks, masonry blocks and stonework. In addition, Mortar Mix is suitable for general-purpose mortar applications.

Applications

• Brick and Block Laying


• Paver edges


• General Mortar repair

Instructions

Step 1 Place the required amount of Mortar Mix into a wheelbarrow, plastic bucket or on a non-absorbent surface making a ‘well’ in the centre of the powder for the water.
Step 2 Add the clean, pre-measured water gradually (3.5 litres of water per 20kg bag), making sure that it does not wash any of the cement away and mix thoroughly to obtain an even and consistent mix. Only mix as much mortar as you can use within one (1) hour.
Step 3 Apply the mix with a trowel. Allow the Mortar Mix to stiffen to touch dry before attempting to rake or finishing the mortar joints.